Ubiquiti EdgeSwitch 8 ports 150W | ES-8-150W

The Ubiquiti EdgeSwitch 8 Ports 150W – ES-8-150W is a versatile managed switch designed for small to medium-sized networks.

It offers robust performance and PoE capabilities, making it suitable for powering devices such as IP cameras and access points directly over Ethernet.

Specifications

• Management Interface:
  • (1) RJ45 serial port, Ethernet In/Out-Band
• Networking Interface:
  • (8) GbE RJ45 ports
  • (2) 1G SFP ports
• PoE Interface:
  • (8) PoE/PoE+ (Pins 1, 2+; 3, 6-)
  • (8) 24V/0.7A passive PoE (Pins 4, 5+; 7, 😎
• Total Non-Blocking Throughput: 10 Gbps
• Switching Capacity: 20 Gbps
• Forwarding Rate: 14.88 Mpps
• Power Method:
  • 100-240V AC, universal input, 50/60 Hz
  • AC/DC integrated PSU
  • 42–56V DC terminal block, external input (Self-correcting polarity protection)
• Power Supply: AC/DC, internal, 150W
• Max Power Consumption: 20W (excluding PoE output)
• Total PoE Available: 150W
• Max PoE Wattage per Port by PSE:
  • PoE+: 34.2W
  • Passive PoE: 17W
• Voltage Range PoE Mode:
  • PoE+: 50–57V
  • Passive PoE: 20–27V
• ESD/EMP Protection: Air/contact: ± 24kV
• Button: Factory reset
• Ambient Operating Temperature:
  • Internal AC/DC at 150W: -25 to 45°C (-13 to 113°F)
  • Internal AC/DC at 100W: -25 to 55°C (-13 to 131°F)
  • External DC: -25 to 60°C (-13 to 140°F)
• Ambient Operating Humidity: 5 to 95% noncondensing
• Certifications: CE, FCC, IC

LEDs

• Indicators for:
  • System status
  • Ethernet ports: PoE, link/speed/activity
  • SFP ports: link/speed/activity

Common FAQs

• Are Ubiquiti Edge switches managed?

Yes, Ubiquiti EdgeSwitches are managed switches. They offer features like VLAN support, QoS, port mirroring, and network monitoring capabilities, which can be configured through the web interface.

• What is the default IP for EdgeSwitch 150W?

The default IP address for the EdgeSwitch 150W is typically 192.168.1.1. This can be accessed via a web browser to configure the switch.

• What is the default login for Ubiquiti EdgeSwitch?

The default login credentials for accessing the Ubiquiti EdgeSwitch are:

• Username: ubnt
• Password: ubnt
• What is the IP address of the EdgeSwitch?

The IP address of the EdgeSwitch can be set to 192.168.1.1 by default, but it can be changed during the initial configuration. You can also assign a static IP or configure DHCP based on your network requirements.